4in Ford Lift Kit | Diesel

4in Ford Lift Kit | Diesel Gallery
4in Ford Lift Kit | Diesel Gallery 1
4in Ford Lift Kit | Diesel Gallery 2
4in Ford Lift Kit | Diesel Gallery 3
2005 - 2007 F250/350 Super Duty 4WD Diesel Gallery 4
2005 - 2007 F250/350 Super Duty 4WD Diesel Gallery 5
4in Ford Lift Kit | Diesel Gallery
4in Ford Lift Kit | Diesel Gallery 1
4in Ford Lift Kit | Diesel Gallery 2
4in Ford Lift Kit | Diesel Gallery 3
2005 - 2007 F250/350 Super Duty 4WD Diesel Gallery 4
2005 - 2007 F250/350 Super Duty 4WD Diesel Gallery 5

4in Ford Lift Kit | Diesel

Starting At*: $1,180.00 - $2,300.00
FREE Shipping on ALL ORDERS!*
*within the contiguous US; ground shipments only.
Year: Year
Make: Make
Model: Model
Find a Dealer CALL 800-551-4955
CALL 800-551-4955
What is this?View Complete Details
  • This is a complete coil spring lift kit for the 2005-2007 Ford F-250/F-350 – diesel engine
  • Provides 4” lift height
  • Includes track bar and radius arm relocation brackets, front and rear Superlift shocks or Front and rear 5100 Series Bilstein shocks or Front and Rear Fox Shocks
What does it include?
  • Front coil springs, track bar bracket, radius arm brackets, sway bar correction, shocks, rear block and u-bolt kit, and all hardware required specific to the 2005-2007 4wd Ford F-250 | F-350 DIESEL
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

Superlift Suspension Systems now available with Superlift Shocks OR Bilstein Shocks OR Fox® Shocks:

 

This 4” Lift for the 2005-2007 Ford Super Duty F-250 | F-350 4WD features Superlift’s engine specific coil springs to ensure proper lift height and maintain factory ride quality.  Radius arm drop brackets are used to restore proper caster angle and alignment. Other components included with this 4-inch suspension system are front compression travel-stop relocation brackets, track bar relocation bracket, front anti-sway bar extensions, and steering stabilizer bracket.  Rear lift is acheieved by 2.5 inch blocks.

 

Complete your 4-inch Ford F-250 | F-350 with the most extensive variety of shocks on the suspension market.  Shocks for this kit are available in the following: Superlift Shocks OR Bilstein 5100 Series OR Fox Performance Series 2.0 IFP Shocks.

 

Features:

  • Replacement Front coil springs improve ride quality while rear blocks maintain load capacity
  • Radius Arm Drop Brackets
  • Front Compression Travel-Stop Brackets prevent suspension over-compression
  • Track bar relocation bracket prevents stud bind, resulting roll and yaw, and steering wheel kick
  • Threaded front anti-sway extensions do not require cutting or welding
  • Front and Rear Shock Options: Superlift Shocks OR Bilstein® 5100 Series Shocks OR Fox® Performance Series 2.0 IFP Shocks
  • Backed by our limited lifetime warranty

 

Benefits:

  • Aligns to OEM specifications
  • Maintains ride quality and handling characteristics

 

NOTES:

  • If equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required.  Part # 9649
  • Dually Applications may require different u-bolts
  • For Super duty’s equipped with top mount overloads, a different u-bolt is required. Part # 11674 will need or replace block kit with part #11694
  •  
Tire Wheel Backspacing Offset
35 x 12.5 17 x 9 4.5 -
35 x 12.5 18 x 9 4.5 -
35 x 12.5 20 x 9 4.5 -

 

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

  • Installation time: 7-8 hours
  • Difficulty level: 3 of 5

Additional Info

  • If equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required.  Part # 9649
  • Dually Applications may require different u-bolts
  • For Super duty’s equipped with top mount overloads, a different u-bolt is required. Part # 11674 will need or replace block kit with part #11694

 

WHAT IS THE DIFFERENCE BETWEEN SUPERLIFT AND BILSTEIN SHOCKS?

Bilstein shocks are a mono-tube gas pressurized shock. The Superlift shocks are coated with a white paint; the Bilstein shocks are a brushed steel body with a nickel and clear zinc finish. Bilstein shocks are more tuned for the application and offer more precise valving.

Sorry, there are currently no reviews for this product

Superlift's Premium Customer Satisfaction

Real Reviews

Our main goal & our most gratifying accomplishments come from achieving 100% customer satisfaction. Don't believe us? Check out what our customers are saying about Superlift. 

Limited Lifetime Warranty

Confidence is included and protection is free. Plus with our Satisfaction Guarantee,  and Limited Lifetime Warranty on all our products we want you to purchase our product with complete confidence because we stand by it

Knowledge Base

Choosing your lift should be easy. Let's us help you become a pro. To learn more about lifts, installation and more check out our FAQ, Dictionary, or feel free just to contact us for support.

Professional Installers

Don't have time to chat or talk? Need expert advice or have installation needs? Locate one of Authorized Dealers near you for superior and professional service.

×